Atec Amplifier-Research-30S1G3 Instrukcja Użytkownika Pobierz pdf

160 School House Road, Souderton, PA 18964-9990 USA

Phone 215-723-8181•FAX 215-723-5688

MODEL 30S1G3

M1, M2, M3

30 WATTS CW

0.8 - 3.0 GHz

The Model 30S1G3 is a solid state, self-contained, air-cooled, broadband amplifier designed for

applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish

contemporary cabinet, the unit is designed for benchtop use, but can be removed from the cabinet for

immediate equipment rack mounting.

The 30S1G3, when used with a sweep generator, will provide a minimum of 30 watts of RF power.

Included is a front panel gain control which permits the operator to conveniently set the desired

output level. The 30S1G3 is protected from RF input overdrive by an RF input leveling circuit which

controls the RF input level to the RF amplifier first stage when the RF input level is increased above

0 dBm. The RF amplifier stages are protected from over-temperature by removing the DC voltage to

them if an over-temperature condition occurs due to cooling blockage or fan failure. There is a digital

display on the front panel to indicate the operate status and fault conditions if an over-temperature or

power supply fault has occurred. The unit can be returned to operate when the condition has been

cleared. The 30S1G3 digital panel provides control of all amplifier functions both locally and

remotely via IEEE-488 (GPIB) or RS-232 interfaces.

The low level of spurious signals and linearity of the Model 30S1G3 make it ideal for use as a driver

amplifier in testing wireless and communication components and subsystems. It can be used as a test

instrument covering multiple frequency bands and is suitable for a variety of communication

technologies such as CDMA, W-CDMA, TDMA, GSM etc. It is also suitable for EMC Test

applications where undistorted modulation envelopes are desired.

OUTPUT POWER (Watts)

3RD ORDER INTERCEPT POINT (dBm)

0 1 2 3 4

FREQUENCY (GHz)

MODEL 30S1G3

Typical Performance

LINEAR @ 1dB COMPRESSION

3RD ORDER INTERCEPT POINT

LINEAR @ 3dB COMPRESSION

REV082202

1 2

160 School House Road, Souderton, PA 18964-9990 USAPhone 215-723-8181•FAX 215-723-5688 MODEL 30S1G3 M1, M2, M3 30 WATTS CW 0.8 - 3.0 GHz The Model

SPECIFICATIONS Model 30S1G3 RATED POWER OUTPUT... 30 WATTS MINIMUM INPUT FOR RATED OUTPUT.... 1.0 MILLIWATT MAXIMUM POWER OUTP

Brak uwag

Atec Amplifier-Research-30S1G3 Instrukcja Użytkownika